Jenway 67 series spectrophotometers and accessories

The Jenway 67 series spectrophotometers are complimented by a wide range of accessories. In order to simplify the ordering process and to make everyone's stock holding as simple and as easy as possible Jenway are making some changes to the part numbers of the 67 series spectrophotometers and accessories.

The changes detailed below will come into force on 3rd January 2012.

67 Series Spectrophotometers

Jenway currently offer 3 models in this range:
• Model 6700 which covers 320 to 1100nm with a 4nm spectral bandwidth
• Model 6705 which covers 190 to 1100nm with a 4nm spectral bandwidth
• Model 6715 which covers 190 to 1100nm with 1.5nm spectral bandwidth

In order to simplify the 67 range and bring it in line with the other Jenway spectrophotometer ranges, from January 2012, Jenway are going to supply the 67 spectrophotometers with a single cell fitted as standard. All of the other accessories are still available but they must be ordered separately and will no longer be supplied fitted. This will result in a reduction of part codes and will make stock holding of standard instruments and accessories much easier for everyone.

When the 67 series range was designed Jenway ensured that the printer and all accessories can be fitted easily without the requirement for any tools. When the active accessories are fitted the instrument automatically detects which accessory has been fitted when performing its warm up checks.

With the commonality of passive accessories across the whole Jenway range there has been a duplication of part codes due to the different time scales of product launches. Therefore from January 2012 the part codes for the passive accessories in the 63, 73 and 67 ranges will be the same. This will simplify the ordering process and make stock holding of accessories very easy. For example if a customer requires a passive accessory for the 67 series range they no longer need to purchase a sample chamber with the passive accessory fitted which will result in cost savings.

To reflect these changes the existing part codes will no longer be in use from 3rd January 2012 and the accessories must be ordered using the separate part codes as detailed in the document below:


Document detailing changes to 67 instruments and accessories

67 series passive accessories codes
From January 2012 it will no longer be necessary to purchase a sample chamber with the passive accessory fitted. To reflect these changes the following part codes will no longer be in use and the passive accessories must be ordered using the part codes detailed below:
OLD Part code Description Alternative part code
660 801 10x10mm cuvette holder 630 204
660 901 Test tube holder 637 071
661 001 Adjustable cuvette holder 630 005
661 101 Micro-cuvette holder 630 304

73 series passive accessories codes
Due to the common platform of the Jenway passive accessories the part codes for the 73 series passive accessories will also be changed as detailed below:
OLD Part code Description Alternative part code
735 801 10x10mm cuvette holder 630 204
735 901 Test tube holder 637 071
736 001 Adjustable cuvette holder 630 005
736 101 Micro-cuvette holder 630 304

63 series accessories codes
The 63 series passive accessories are the platform which the whole Jenway range of passive accessories is based on. Currently Jenway offer three different sized test tube holders for the 63 series spectrophotometers. These accessories were superseded by the combined test tube holder which allows 10x10 cuvettes, 16 and 24mm test tubes to be measured (part code 637 017). Therefore to simplify the range and keep the consistency with the 73 and 67 passive accessories Jenway are going to rationalise the three separate test tube holders and offer the combination one in its place.
OLD Part code Description Alternative part codes Description
630 020 Test tube holder ( 13mm diameter) 637 071 10/ 16/ 24 mm test tube holder
630 021 Test tube holder ( 25mm diameter) 637 071 10/ 16/ 24 mm test tube holder
630 022 Test tube holder ( 16mm diameter) 637 071 10/ 16/ 24 mm test tube holder

6715B0
63/73/67 passive accessories
Adjustable path length cuvette holder - 630 005
73 series changing passive single cell accessory
637 071 - Combined test tube holder